ok....i redid my headlight wiring for my h4 conversion, works gooder now.  ran the factory headlight power to trip some 30amp relays so power comes from the battery on seperate relays for hi and lo beam.

 

my question is where can i get the female spade terminals that lock into the connector block.  i had to buy pigtails but they use 16ga wires and my upgrade uses 14ga.  i'd like to run the 14ga right into the lights.

 

my usual source, www.delcity.net only lists pigtails, not the crimp terminals.  dunno why, they have damn near everything else you'd need, just not these terminals.

 im pretty resourceful in finding stuff like this, but im stumped this time.  dont need the kits, just the terminals.

any help would be greatly appreciated, thanks gang.

 

 

lawson hardware they have anything

--------------------------------------------------------------
DRIVE IT LIKE YOU STOLE IT!!!!!!!!!!!!!

found em, thanx alot.  what a bear they are to find, its almost nuts.  you'd think that dorman would have them in their catalog, but they only have the pigtails.

 

a couple of sources for electrical stuff that i found while searching for these terminals besides del city,

 www.superlumination.com

 www.waytekwire.com

 

if you need hole plugs, this place is great.  great for filling in old switch holes in the dash.

www.widgetco.com

 

when i find more of my sources, i'll let the gang know.  some i didnt save like i should have.

 

--------------------------------------------------------------
will play in mud

found it.....

 

for grommets and bushings:

http://www.steinair.com/grommets.htm

--------------------------------------------------------------
will play in mud